Considered standard for spinning processes with combed wool systems.

It is a semidull, low modulus fiber with medium tenacity and good dye affinity. It dyes normally with dispersed dyes.

Its air shrinkage (190°C, 15 min) is considered low, since it ranges between 6 and 10%

Due to its properties, this fiber is specially recommended for blends with wool, viscose, linen and acrylics. Its processability in long fiber equipment, both for blends as well as alone, is excellent

PRESENTATION 

TOW: Suited to cut in tow converter.

TOPS: This is the product mostly recommended for wool blends. The yarns obtained show a magnificent behavior in weaving processes, especially woven. Its main applications are fabrics for women and men outer wear.

STRAIGHT CUT STAPLE FIBER: This is used on viscose and acrylic blends, as well as in the Non-Wovens sector with applications such as:

• High volume wadding.
  
• Fine laps (Felts, Geotextiles, Filters, etc.).

PRODUCTS AVAILABLE
CORLEN® TOW 3.3 dtex SM
CORLEN® TOW 3.3 dtex x 88mm SM – Variable Cut (75 to 130 mm).
CORLEN® STAPLE FIBER 3.3 dtex x 38/50/64/75/100 mm SM – Straight Cut